Annual Certification:
Inspection of the unit and the need for hydro testing or 6 year maintenance. Local authorities require tags to be attached to the extinguisher to verify this service.
Monthly Inspections:
The extinguisher is checked for damage, discharge and that it is fully charged (gauge reading and that the seal is not broken.
Fire Extinguisher Maintenance (6 Yr Maintenance): Every six years, extinguishers shall be emptied and subject to thorough examination of mechanical parts, extinguishing agent and expelling means. When applicable, maintenance procedures are done during periodic recharging or hydro testing, the six year requirement will begin from that date.
12 Year Hydro-Static Testing: This shall be performed on the cylinder showing that the extinguisher is still within factory standards. The cylinder is pressurized and expanded to the specifications set forth by the particular manufacturer of the unit. Recharge should be done immediately after any discharge with the extinguishing agent specified on the unit.
Fire Hydrants and Backflow Testing
We can repair, inspect and test your fire hydrants and backflows.
Fire Hydrants:
Flow testing and inspections
Backflows:
Certified annual and quarterly testing
We can also test and inspect your fire alarm systems and your Exit and Emergency light systems.